行业标准规范英汉对照-通用零部件2
发布时间：2024-04-29 点击：134
151 gb/t 866-1986 半沉头铆钉 (粗制) oval countersunk head rivets--black
152 gb/t 867-1986 半圆头铆钉 round head rivets
153 gb/t 868-1986 平锥头铆钉 cone head rivets
154 gb/t 869-1986 沉头铆钉 countersunk head rivets
155 gb/t 870-1986 半沉头铆钉 oval countersunk head rivets
156 gb/t 871-1986 扁圆头铆钉 flat round head rivets
157 gb/t 872-1986 扁平头铆钉 thin head rivets
158 gb/t 873-1986 扁圆头半空心铆钉 oval head semi-tubular rivets
159 gb/t 874-1986 120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets
160 gb/t 875-1986 偏平头半空心铆钉 thin head semi-tubular rivet
161 gb/t 876-1986 空心铆钉 tubular rivets
162 gb/t 877-1986 开尾圆锥销 taper pins with split
163 gb/t 878-1986 螺纹圆柱销 parallel pins with external thread
164 gb/t 879-1986 弹性圆柱销 spring-type straight pins—slotted
165 gb/t 880-1986 带孔销 pins with split pin hole
166 gb/t 881-1986 螺尾锥销 taper pins with external thread
167 gb/t 882-1986 销轴 clevis pins with head
168 gb/t 883-1986 锥销锁紧挡圈 lock rings with cone pin
169 gb/t 884-1986 螺钉锁紧挡圈 lock ring with screw
170 gb/t 885-1986 带锁圈的螺钉锁紧挡圈 lock rings with screw and circlip
171 gb/t 886-1986 轴肩挡圈 rings for shoulder
172 gb/t 889-1986 1 型非金属嵌件六角锁紧螺母 prevailing torque type hexagon nuts (with non-metallic insert),style 1
173 gb/t 891-1986 螺钉紧固轴端挡圈 lock rings at the end of shaft with screw
174 gb/t 892-1986 螺栓紧固轴端挡圈 lock rings at the end of shaft with bolt
175 gb/t 893.1-1986 孔用弹性挡圈--a型 circlips for holes--type a
176 gb/t 893.2-1986 孔用弹性挡圈--b型 circlips for hole--type b
177 gb/t 894.1-1986 轴用弹性挡圈--a型 circlips for shaft--type a
178 gb/t 894.2-1986 轴用弹性挡圈--b型 circlips for shaft--type b
179 gb/t 895.1-1986 孔用钢丝挡圈 roundwire snap rings for hole
180 gb/t 895.2-1986 轴用钢丝挡圈 roundwire snap rings for shaft
181 gb/t 896-1986 开口挡圈 e rings
182 gb/t 897-1988 双头螺柱 bm=1d double end studs--bm=1d
183 gb/t 898-1988 双头螺柱 bm=1.25d double end studs bm=1.25d
184 gb/t 899-1988 双头螺柱 bm=1.5d double end studs bm=1.5d
185 gb/t 900-1988 双头螺柱 bm=2d double end studs bm=2d
186 gb/t 901-1988 等长双头螺柱 b级 double end studs (clamping type)--product grade b
187 gb/t 902.1-1989 手工焊用焊接螺柱 weld studs for manual welding
188 gb/t 902.2-1989 机动弧焊用焊接螺柱 weld studs for arc welding
189 gb/t 902.3-1989 储能焊用焊接螺柱 weld studs for capacitor discharge welding
190 gb/t 921-1986 钢丝锁圈 round wire circlips
191 gb/t 922-1986 木螺钉技术条件 specifications for wood screws
192 gb/t 923-1988 盖形螺母 acorn nuts
193 gb/t 925-1988 轻型六角自锁螺母 self-locking nuts,hexagon light
194 gb/t 927-1988 球面六角自锁螺母 self-locking nuts,hexagon sphere
195 gb/t 929-1988 单耳托板自锁螺母 self-locking nuts,singlelug, anchor
196 gb/t 930-1988 双耳托板自锁螺母 self-locking nuts,twolug, anchor
197 gb/t 931-1988 角形托板自锁螺母 self-locking nuts,angle, anchor
198 gb/t 932-1988 气密单耳托板自锁螺母 self-locking nuts,singlelug, anchor, sealing,
199 gb/t 933-1988 气密双耳托板自锁螺母 self-locking nuts,twolug, anchor, sealing
200 gb/t 937-1988 成组游动托板自锁螺母 self-locking nuts, anchor, floating,gang channel
201 gb/t 938-1988 游动自锁螺母 self-locking nuts, floating
202 gb/t 939-1988 单耳托板自锁螺母保护罩 boots for self-locking nuts, singlelug, anchor
203 gb/t 940-1988 双耳托板自锁螺母保护罩 boots for self-locking nuts,twolug, anchor
204 gb/t 941-1988 角形托板自锁螺母保护罩 boots for self-locking nuts,angle, anchor
205 gb/t 943-1988 自锁螺母技术条件 procurement specification for self-locking nuts
206 gb/t 945-1976 十字槽球面中柱头螺钉 screws,cross recessed,thin raised cheese head
207 gb/t 946-1988 开槽球面圆柱头轴位螺钉 slotted raised cheese head with shoulder
208 gb/t 947-1988 开槽球面大圆柱头螺钉 slotted large raised cheese head screws
209 gb/t 948-1988 开槽沉头不脱出螺钉 slotted countersunk head screws with waisted shank
210 gb/t 949-1988 开槽半沉头不脱出螺钉 slotted raised countersunk head screws with waisted shank
211 gb/t 950-1986 十字槽圆头木螺钉 cross recessed round head wood screws
212 gb/t 951-1986 十字槽沉头木螺钉 cross recessed countersunk head wood screws
213 gb/t 952-1986 十字槽半沉头木螺钉 cross recessed raised countersunk head wood screws
214 gb/t 953-1988 等长双头螺柱 c级 double end studs (clamping type)--product grade c
215 gb/t 954-1986 120°沉头铆钉 120°degree countersunk head rivets
216 gb/t 955-1987 波形弹性垫圈 wave spring washers
217 gb/t 956.1-1987 锥形锁紧垫圈 countersunk external toothed lock washers
218 gb/t 956.2-1987 锥形锯齿锁紧垫圈 countersunk serrated external toothed lock washers
219 gb/t 959.1-1986 挡圈技术条件--弹性挡圈 specifications for ring—circlips
220 gb/t 959.2-1986 挡圈技术条件--钢丝挡圈 specifications for ring—round wire snap rings
221 gb/t 959.3-1986 挡圈技术条件--切制挡圈 specifications for ring—cutting rings
222 gb/t 960-1986 夹紧挡圈 grip rings
223 gb/t 961-1988 单耳托板自锁螺母垫片 spacers for self-locking nuts,singlelug, anchor
224 gb/t 962-1988 双耳托板自锁螺母垫片 spacers for self-locking nuts,twolug, anchor
225 gb/t 963-1988 角形托板自锁螺母垫片 spacers for self-locking nuts,angle, anchor
226 gb/t 973-1976 十字槽扁圆头螺钉 screws,cross recessed,oval head
227 gb/t 974-1976 十字槽120°半沉头螺钉 screws,cross recessed,120°raised countersunk head
228 gb/t 975-1986 管状铆钉 pipe type rivets
229 gb/t 1007-1976 小六角较扁螺母 small hexagon medium thin nuts
230 gb/t 1009-1978 螺母专用技术条件 specified specifications for nuts
231 gb/t 1011-1986 大扁圆头铆钉 truss head rivets
232 gb/t 1012-1986 120°半沉头铆钉 120°degree oval countersunk rivets
233 gb/t 1013-1986 平锥头半空心铆钉 cone head semi-tubuler rivets
234 gb/t 1014-1986 大扁圆头半空心铆钉 truss head semi-tubuar rivets
235 gb/t 1015-1986 沉头半空心铆钉 countersunk head semi-tublar rivets
236 gb/t 1016-1986 无头铆钉 headless rivets
237 gb/t 1017-1978 铆钉专用技术条件 specified specifications for rivets
238 gb/t 1021-1976 角形垂直单耳止动垫圈 lock washers with angular upturn tab perpendicular to the lug
239 gb/t 1022-1976 角形单耳止动垫圈 lock washers with angular upturn tab in line to the lug
240 gb/t 1023-1976 角形垂直外舌止动垫圈 lock washers with angular upturn tab perpendicular to the external tab
241 gb/t 1024-1976 角形外舌止动垫圈 lock washers with angular upturn tab in line to the external tab
242 gb/t 1030-1988 内球面垫圈 inner sphere washers
243 gb/t 1047-1995 管道元件的公称通径 nominal size for pipe components
244 gb/t 1048-1990 管道元件公称压力 nominal pressure for pipe components
245 gb/t 1095-1979 平键 键和键槽的剖面尺寸 parallel keys--dimensions of cross sections and keyways
246 gb/t 1096-1979 普通平键 型式尺寸 plain parallel keys--types and dimensions
247 gb/t 1097-1979 导向平键 型式尺寸 feather keys--types and dimensions
248 gb/t 1098-1979 半圆键 键和键槽的剖面尺寸 semi-circular (woodruff) keys--dimensions of cross sections and keyways
249 gb/t 1099-1979 半圆键 型式尺寸 woodruff keys--types and dimensions
250 gb/t 1144-1987 矩形花键尺寸、公差和检验 straight-sided spline—dimensions tolerances and verification
251 gb/t 1168-1976 螺柱技术条件 studs--technical requirements
252 gb/t 1228-1991 钢结构用高强度大六角头螺栓 high strength bolts with large hexagon head for steel structures 253 gb/t 1229-1991 钢结构用高强度大六角螺母 high strength large hexagon nuts for steel structures
254 gb/t 1230-1991 钢结构用高强度垫圈 high strength plain washers for steel structures
255 gb/t 1231-1991 钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件 specifications of high strength bolts with large hexa-gon head, large hexagon nuts, plain washers for steel structures
256 gb/t 1237-1988 紧固件的标记方法 designation system for fasteners
257 gb/t 1337-1988 六角自锁螺母 self-locking nuts,hexagon
258 gb/t 1338-1988 小六角扁自锁螺母 self-locking nuts,reduced hexagon oblate
259 gb/t 1339-1988 小六角自锁螺母 self-locking nuts,reduced hexagon
260 gb/t 1340-1988 成组游动托板自锁螺母支架 supports for self-locking nuts,anchor floating,gang channel
261 gb/t 1356-1988 淅开线圆柱齿轮 基本齿廓 basic rack tooth profile of involute cylindrical gears
262 gb/t 1357-1987 渐开线圆柱齿轮模数 modules of involute cyindrical gears
263 gb/t 1563-1979 楔键 键和键槽的剖面尺寸 taper keys--cross section dimensions of keys and keyways
264 gb/t 1564-1979 普通楔键 型式尺寸 taper keys for general use--types and dimensions
265 gb/t 1565-1979 钩头楔键 型式尺寸 gib-head taper keys--types and dimensions
266 gb/t 1566-1979 薄型平键 键和键槽的剖面尺寸 thin flat keys--cross section dimensions and keyways
267 gb/t 1567-1979 薄型平键 型式尺寸 thin flat keys--types and dimensions
268 gb/t 1840-1989 圆弧圆柱齿轮模数 modules of cylindrical gear with circular arc profiles
269 gb/t 1974-1980 切向键及其键槽 tangential keys and keyways
270 gb/t 2362-1990 小模数渐开线圆柱齿轮基本齿廓 basic rack tooth profile of fine-pitch involute cylindrical gears 271 gb/t 2363-1990 小模数渐开线圆柱齿轮精度 accuracy of fine-pitch involute cylindrical gears
272 gb/t 2509-1981 滑动轴承铜合金整体轴套形式、尺寸与公差 copper alloy integrated shaft sleeves for plain bearings--types, dimensions and tolerances
273 gb/t 2510-1981 滑动轴承铜合金带挡边整体轴套形式、尺寸与公差 copper alloy integrated shaft sleeves for plain bearings with gears--types, dimensions and tolerances
274 gb/t 2511-1981 滑动轴承铜合金整体轴套技术条件 copper alloy integrated shaft sleeves--technical requirements
275 gb/t 2555-1981 一般用途管法兰连接尺寸 pipe flange connectors for ordinary use--mounting dimensions
276 gb/t 2556-1981 一般用途管法兰密封面形状和尺寸 pipe flanges for ordinary use--sealing surfaces--forms and dimensions
277 gb/t 2672-1986 内六角花形盘头螺钉 hexagon lobular socket pan head screws
278 gb/t 2673-1986 内六角花形沉头螺钉 hexagon lobular socket countersunk head screws
279 gb/t 2674-1986 内六角花形半沉头螺钉 hexagon lobular socket raised countersunk head screws
280 gb/t 2685-1981 滑动轴承 粉末冶金筒形轴承型式、尺寸与公差 powder metallurgy plain bearing--cylindrical type--types, dimensions and tolerances
281 gb/t 2686-1981 滑动轴承 粉末冶金带挡边筒形轴承型式、尺寸与公差 powder metallurgy plain bearing--rimed cylindrical type--types, dimensions and tolerances
282 gb/t 2687-1981 滑动轴承 粉末冶金球形轴承型式、尺寸与公差 powder metallurgy plain bearing--spherical type--types, dimensions and tolerances
283 gb/t 2688-1981 滑动轴承 粉末冶金轴承技术条件 powder metallurgy plain bearing--technical requirements
284 gb/t 2821-1992 齿轮几何要素代号 symbols for gear geometrical data
285 gb/t 2889-1994 滑动轴承 术语 plain bearings--terms, definitions and classification
286 gb/t 3098.1-1982 紧固件机械性能 螺栓、螺钉和螺柱 mechanical properties of fasteners--bolts, screws and studs
287 gb/t 3098.2-1982 紧固件机械性能 螺母 mechanical properties of fasteners--nuts
288 gb/t 3098.3-1982 紧固件机械性能 紧定螺钉 mechanical properties of fasteners--set screws
289 gb/t 3098.4-1986 紧固件机械性能--细牙螺母 mechanical properties of fasteners--nuts with fine pitch thread
290 gb/t 3098.5-1985 紧固件机械性能 自攻螺钉 mechanical properties of fasteners--tapping screws
291 gb/t 3098.6-1986 紧固件机械性能 不锈钢螺栓, 螺钉, 螺柱和螺母 mechanical properties of fasteners--stainless steel bolts,screws, studs and nuts
292 gb/t 3098.7-1986 紧固件机械性能 自攻锁紧螺钉 粗牙普通螺纹系列 mechanical properties of fasteners--thread forming screws--metric coarse thread series
293 gb/t 3098.8-1992 紧固件机械性能 耐热用螺纹连接副 mechanical properties of fasteners--components for bolted connections made mainly from materials with a high temperature strength
294 gb/t 3098.9-1993 紧固件机械性能有效力矩型钢六角锁紧螺母 mechanical properties of fasteners--prevailing torque type steel hexagon nuts
295 gb/t 3098.10-1993 紧固件机械性能 有色金属制造的螺栓、螺钉、螺柱和螺母 mechanical properties of fasteners--bolts, screws, studs and nuts made of non-ferrous metals
296 gb/t 3098.11-1995 紧固件机械性能自钻自攻螺钉 mechanical properties of fasteners--self-drilling tapping screws
297 gb/t 3098.13-1996 紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mm mechanical properties of fasteners--torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
298 gb/t 3098.12-1996 紧固件机械性能 螺母锥形保证载荷试验 mechanical properties of fasteners--cone proof load test on nuts
299 gb/t 3099-1982 螺栓、螺钉、螺母及附件名词术语 bolts, screws, nuts and accessories--terminology and nomenclature
300 gb/t 3103.1-1982 紧固件公差 螺栓、螺钉和螺母 tolerances for fasteners--bolts, screws and nuts
晋亿实业 连续中标高铁紧固件
详析数控机床出现振动爬行的原因
巴西淡水河谷计划明年将西澳煤炭生产增加三分之一
瓦轴集团开拓欧美市场促进转型新思路
什么是热喷涂?
标准件龙头受益航空工业发展
真空法表面处理技术
原木出口关税上调 俄罗斯木材加工机械需求增加
152 gb/t 867-1986 半圆头铆钉 round head rivets
153 gb/t 868-1986 平锥头铆钉 cone head rivets
154 gb/t 869-1986 沉头铆钉 countersunk head rivets
155 gb/t 870-1986 半沉头铆钉 oval countersunk head rivets
156 gb/t 871-1986 扁圆头铆钉 flat round head rivets
157 gb/t 872-1986 扁平头铆钉 thin head rivets
158 gb/t 873-1986 扁圆头半空心铆钉 oval head semi-tubular rivets
159 gb/t 874-1986 120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets
160 gb/t 875-1986 偏平头半空心铆钉 thin head semi-tubular rivet
161 gb/t 876-1986 空心铆钉 tubular rivets
162 gb/t 877-1986 开尾圆锥销 taper pins with split
163 gb/t 878-1986 螺纹圆柱销 parallel pins with external thread
164 gb/t 879-1986 弹性圆柱销 spring-type straight pins—slotted
165 gb/t 880-1986 带孔销 pins with split pin hole
166 gb/t 881-1986 螺尾锥销 taper pins with external thread
167 gb/t 882-1986 销轴 clevis pins with head
168 gb/t 883-1986 锥销锁紧挡圈 lock rings with cone pin
169 gb/t 884-1986 螺钉锁紧挡圈 lock ring with screw
170 gb/t 885-1986 带锁圈的螺钉锁紧挡圈 lock rings with screw and circlip
171 gb/t 886-1986 轴肩挡圈 rings for shoulder
172 gb/t 889-1986 1 型非金属嵌件六角锁紧螺母 prevailing torque type hexagon nuts (with non-metallic insert),style 1
173 gb/t 891-1986 螺钉紧固轴端挡圈 lock rings at the end of shaft with screw
174 gb/t 892-1986 螺栓紧固轴端挡圈 lock rings at the end of shaft with bolt
175 gb/t 893.1-1986 孔用弹性挡圈--a型 circlips for holes--type a
176 gb/t 893.2-1986 孔用弹性挡圈--b型 circlips for hole--type b
177 gb/t 894.1-1986 轴用弹性挡圈--a型 circlips for shaft--type a
178 gb/t 894.2-1986 轴用弹性挡圈--b型 circlips for shaft--type b
179 gb/t 895.1-1986 孔用钢丝挡圈 roundwire snap rings for hole
180 gb/t 895.2-1986 轴用钢丝挡圈 roundwire snap rings for shaft
181 gb/t 896-1986 开口挡圈 e rings
182 gb/t 897-1988 双头螺柱 bm=1d double end studs--bm=1d
183 gb/t 898-1988 双头螺柱 bm=1.25d double end studs bm=1.25d
184 gb/t 899-1988 双头螺柱 bm=1.5d double end studs bm=1.5d
185 gb/t 900-1988 双头螺柱 bm=2d double end studs bm=2d
186 gb/t 901-1988 等长双头螺柱 b级 double end studs (clamping type)--product grade b
187 gb/t 902.1-1989 手工焊用焊接螺柱 weld studs for manual welding
188 gb/t 902.2-1989 机动弧焊用焊接螺柱 weld studs for arc welding
189 gb/t 902.3-1989 储能焊用焊接螺柱 weld studs for capacitor discharge welding
190 gb/t 921-1986 钢丝锁圈 round wire circlips
191 gb/t 922-1986 木螺钉技术条件 specifications for wood screws
192 gb/t 923-1988 盖形螺母 acorn nuts
193 gb/t 925-1988 轻型六角自锁螺母 self-locking nuts,hexagon light
194 gb/t 927-1988 球面六角自锁螺母 self-locking nuts,hexagon sphere
195 gb/t 929-1988 单耳托板自锁螺母 self-locking nuts,singlelug, anchor
196 gb/t 930-1988 双耳托板自锁螺母 self-locking nuts,twolug, anchor
197 gb/t 931-1988 角形托板自锁螺母 self-locking nuts,angle, anchor
198 gb/t 932-1988 气密单耳托板自锁螺母 self-locking nuts,singlelug, anchor, sealing,
199 gb/t 933-1988 气密双耳托板自锁螺母 self-locking nuts,twolug, anchor, sealing
200 gb/t 937-1988 成组游动托板自锁螺母 self-locking nuts, anchor, floating,gang channel
201 gb/t 938-1988 游动自锁螺母 self-locking nuts, floating
202 gb/t 939-1988 单耳托板自锁螺母保护罩 boots for self-locking nuts, singlelug, anchor
203 gb/t 940-1988 双耳托板自锁螺母保护罩 boots for self-locking nuts,twolug, anchor
204 gb/t 941-1988 角形托板自锁螺母保护罩 boots for self-locking nuts,angle, anchor
205 gb/t 943-1988 自锁螺母技术条件 procurement specification for self-locking nuts
206 gb/t 945-1976 十字槽球面中柱头螺钉 screws,cross recessed,thin raised cheese head
207 gb/t 946-1988 开槽球面圆柱头轴位螺钉 slotted raised cheese head with shoulder
208 gb/t 947-1988 开槽球面大圆柱头螺钉 slotted large raised cheese head screws
209 gb/t 948-1988 开槽沉头不脱出螺钉 slotted countersunk head screws with waisted shank
210 gb/t 949-1988 开槽半沉头不脱出螺钉 slotted raised countersunk head screws with waisted shank
211 gb/t 950-1986 十字槽圆头木螺钉 cross recessed round head wood screws
212 gb/t 951-1986 十字槽沉头木螺钉 cross recessed countersunk head wood screws
213 gb/t 952-1986 十字槽半沉头木螺钉 cross recessed raised countersunk head wood screws
214 gb/t 953-1988 等长双头螺柱 c级 double end studs (clamping type)--product grade c
215 gb/t 954-1986 120°沉头铆钉 120°degree countersunk head rivets
216 gb/t 955-1987 波形弹性垫圈 wave spring washers
217 gb/t 956.1-1987 锥形锁紧垫圈 countersunk external toothed lock washers
218 gb/t 956.2-1987 锥形锯齿锁紧垫圈 countersunk serrated external toothed lock washers
219 gb/t 959.1-1986 挡圈技术条件--弹性挡圈 specifications for ring—circlips
220 gb/t 959.2-1986 挡圈技术条件--钢丝挡圈 specifications for ring—round wire snap rings
221 gb/t 959.3-1986 挡圈技术条件--切制挡圈 specifications for ring—cutting rings
222 gb/t 960-1986 夹紧挡圈 grip rings
223 gb/t 961-1988 单耳托板自锁螺母垫片 spacers for self-locking nuts,singlelug, anchor
224 gb/t 962-1988 双耳托板自锁螺母垫片 spacers for self-locking nuts,twolug, anchor
225 gb/t 963-1988 角形托板自锁螺母垫片 spacers for self-locking nuts,angle, anchor
226 gb/t 973-1976 十字槽扁圆头螺钉 screws,cross recessed,oval head
227 gb/t 974-1976 十字槽120°半沉头螺钉 screws,cross recessed,120°raised countersunk head
228 gb/t 975-1986 管状铆钉 pipe type rivets
229 gb/t 1007-1976 小六角较扁螺母 small hexagon medium thin nuts
230 gb/t 1009-1978 螺母专用技术条件 specified specifications for nuts
231 gb/t 1011-1986 大扁圆头铆钉 truss head rivets
232 gb/t 1012-1986 120°半沉头铆钉 120°degree oval countersunk rivets
233 gb/t 1013-1986 平锥头半空心铆钉 cone head semi-tubuler rivets
234 gb/t 1014-1986 大扁圆头半空心铆钉 truss head semi-tubuar rivets
235 gb/t 1015-1986 沉头半空心铆钉 countersunk head semi-tublar rivets
236 gb/t 1016-1986 无头铆钉 headless rivets
237 gb/t 1017-1978 铆钉专用技术条件 specified specifications for rivets
238 gb/t 1021-1976 角形垂直单耳止动垫圈 lock washers with angular upturn tab perpendicular to the lug
239 gb/t 1022-1976 角形单耳止动垫圈 lock washers with angular upturn tab in line to the lug
240 gb/t 1023-1976 角形垂直外舌止动垫圈 lock washers with angular upturn tab perpendicular to the external tab
241 gb/t 1024-1976 角形外舌止动垫圈 lock washers with angular upturn tab in line to the external tab
242 gb/t 1030-1988 内球面垫圈 inner sphere washers
243 gb/t 1047-1995 管道元件的公称通径 nominal size for pipe components
244 gb/t 1048-1990 管道元件公称压力 nominal pressure for pipe components
245 gb/t 1095-1979 平键 键和键槽的剖面尺寸 parallel keys--dimensions of cross sections and keyways
246 gb/t 1096-1979 普通平键 型式尺寸 plain parallel keys--types and dimensions
247 gb/t 1097-1979 导向平键 型式尺寸 feather keys--types and dimensions
248 gb/t 1098-1979 半圆键 键和键槽的剖面尺寸 semi-circular (woodruff) keys--dimensions of cross sections and keyways
249 gb/t 1099-1979 半圆键 型式尺寸 woodruff keys--types and dimensions
250 gb/t 1144-1987 矩形花键尺寸、公差和检验 straight-sided spline—dimensions tolerances and verification
251 gb/t 1168-1976 螺柱技术条件 studs--technical requirements
252 gb/t 1228-1991 钢结构用高强度大六角头螺栓 high strength bolts with large hexagon head for steel structures 253 gb/t 1229-1991 钢结构用高强度大六角螺母 high strength large hexagon nuts for steel structures
254 gb/t 1230-1991 钢结构用高强度垫圈 high strength plain washers for steel structures
255 gb/t 1231-1991 钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件 specifications of high strength bolts with large hexa-gon head, large hexagon nuts, plain washers for steel structures
256 gb/t 1237-1988 紧固件的标记方法 designation system for fasteners
257 gb/t 1337-1988 六角自锁螺母 self-locking nuts,hexagon
258 gb/t 1338-1988 小六角扁自锁螺母 self-locking nuts,reduced hexagon oblate
259 gb/t 1339-1988 小六角自锁螺母 self-locking nuts,reduced hexagon
260 gb/t 1340-1988 成组游动托板自锁螺母支架 supports for self-locking nuts,anchor floating,gang channel
261 gb/t 1356-1988 淅开线圆柱齿轮 基本齿廓 basic rack tooth profile of involute cylindrical gears
262 gb/t 1357-1987 渐开线圆柱齿轮模数 modules of involute cyindrical gears
263 gb/t 1563-1979 楔键 键和键槽的剖面尺寸 taper keys--cross section dimensions of keys and keyways
264 gb/t 1564-1979 普通楔键 型式尺寸 taper keys for general use--types and dimensions
265 gb/t 1565-1979 钩头楔键 型式尺寸 gib-head taper keys--types and dimensions
266 gb/t 1566-1979 薄型平键 键和键槽的剖面尺寸 thin flat keys--cross section dimensions and keyways
267 gb/t 1567-1979 薄型平键 型式尺寸 thin flat keys--types and dimensions
268 gb/t 1840-1989 圆弧圆柱齿轮模数 modules of cylindrical gear with circular arc profiles
269 gb/t 1974-1980 切向键及其键槽 tangential keys and keyways
270 gb/t 2362-1990 小模数渐开线圆柱齿轮基本齿廓 basic rack tooth profile of fine-pitch involute cylindrical gears 271 gb/t 2363-1990 小模数渐开线圆柱齿轮精度 accuracy of fine-pitch involute cylindrical gears
272 gb/t 2509-1981 滑动轴承铜合金整体轴套形式、尺寸与公差 copper alloy integrated shaft sleeves for plain bearings--types, dimensions and tolerances
273 gb/t 2510-1981 滑动轴承铜合金带挡边整体轴套形式、尺寸与公差 copper alloy integrated shaft sleeves for plain bearings with gears--types, dimensions and tolerances
274 gb/t 2511-1981 滑动轴承铜合金整体轴套技术条件 copper alloy integrated shaft sleeves--technical requirements
275 gb/t 2555-1981 一般用途管法兰连接尺寸 pipe flange connectors for ordinary use--mounting dimensions
276 gb/t 2556-1981 一般用途管法兰密封面形状和尺寸 pipe flanges for ordinary use--sealing surfaces--forms and dimensions
277 gb/t 2672-1986 内六角花形盘头螺钉 hexagon lobular socket pan head screws
278 gb/t 2673-1986 内六角花形沉头螺钉 hexagon lobular socket countersunk head screws
279 gb/t 2674-1986 内六角花形半沉头螺钉 hexagon lobular socket raised countersunk head screws
280 gb/t 2685-1981 滑动轴承 粉末冶金筒形轴承型式、尺寸与公差 powder metallurgy plain bearing--cylindrical type--types, dimensions and tolerances
281 gb/t 2686-1981 滑动轴承 粉末冶金带挡边筒形轴承型式、尺寸与公差 powder metallurgy plain bearing--rimed cylindrical type--types, dimensions and tolerances
282 gb/t 2687-1981 滑动轴承 粉末冶金球形轴承型式、尺寸与公差 powder metallurgy plain bearing--spherical type--types, dimensions and tolerances
283 gb/t 2688-1981 滑动轴承 粉末冶金轴承技术条件 powder metallurgy plain bearing--technical requirements
284 gb/t 2821-1992 齿轮几何要素代号 symbols for gear geometrical data
285 gb/t 2889-1994 滑动轴承 术语 plain bearings--terms, definitions and classification
286 gb/t 3098.1-1982 紧固件机械性能 螺栓、螺钉和螺柱 mechanical properties of fasteners--bolts, screws and studs
287 gb/t 3098.2-1982 紧固件机械性能 螺母 mechanical properties of fasteners--nuts
288 gb/t 3098.3-1982 紧固件机械性能 紧定螺钉 mechanical properties of fasteners--set screws
289 gb/t 3098.4-1986 紧固件机械性能--细牙螺母 mechanical properties of fasteners--nuts with fine pitch thread
290 gb/t 3098.5-1985 紧固件机械性能 自攻螺钉 mechanical properties of fasteners--tapping screws
291 gb/t 3098.6-1986 紧固件机械性能 不锈钢螺栓, 螺钉, 螺柱和螺母 mechanical properties of fasteners--stainless steel bolts,screws, studs and nuts
292 gb/t 3098.7-1986 紧固件机械性能 自攻锁紧螺钉 粗牙普通螺纹系列 mechanical properties of fasteners--thread forming screws--metric coarse thread series
293 gb/t 3098.8-1992 紧固件机械性能 耐热用螺纹连接副 mechanical properties of fasteners--components for bolted connections made mainly from materials with a high temperature strength
294 gb/t 3098.9-1993 紧固件机械性能有效力矩型钢六角锁紧螺母 mechanical properties of fasteners--prevailing torque type steel hexagon nuts
295 gb/t 3098.10-1993 紧固件机械性能 有色金属制造的螺栓、螺钉、螺柱和螺母 mechanical properties of fasteners--bolts, screws, studs and nuts made of non-ferrous metals
296 gb/t 3098.11-1995 紧固件机械性能自钻自攻螺钉 mechanical properties of fasteners--self-drilling tapping screws
297 gb/t 3098.13-1996 紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mm mechanical properties of fasteners--torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
298 gb/t 3098.12-1996 紧固件机械性能 螺母锥形保证载荷试验 mechanical properties of fasteners--cone proof load test on nuts
299 gb/t 3099-1982 螺栓、螺钉、螺母及附件名词术语 bolts, screws, nuts and accessories--terminology and nomenclature
300 gb/t 3103.1-1982 紧固件公差 螺栓、螺钉和螺母 tolerances for fasteners--bolts, screws and nuts
晋亿实业 连续中标高铁紧固件
详析数控机床出现振动爬行的原因
巴西淡水河谷计划明年将西澳煤炭生产增加三分之一
瓦轴集团开拓欧美市场促进转型新思路
什么是热喷涂?
标准件龙头受益航空工业发展
真空法表面处理技术
原木出口关税上调 俄罗斯木材加工机械需求增加
上一篇：不锈钢板加工常遇到的困难
下一篇：床身式铣床是一种多用途的生产设备